不锈钢管CORINTO客户
2021年10月13日
关于钢的各种通用术语
2021年10月20日
0

钢管的总称

一般术语
  ①Delivery status
   refers to the final plastic deformation or final heat treatment state of the delivered product. Generally, those delivered without heat treatment are called hot-rolled or cold-drawn (rolled) state or manufacturing state; those delivered after heat treatment are called heat-treated state, or normalized (normalized), quenched and tempered, solution, annealed according to the type of heat treatment state. When ordering, the delivery status must be indicated in the contract.
  ②Delivery according to actual weight or theoretical weight
   Actual weight-when delivered, the weight of the product is delivered according to the weighed (weighed) weight;
  Theoretical weight-at the time of delivery, the weight of the product is the weight calculated according to the nominal size of the steel. The calculation formula is as follows (if delivery is required according to the theoretical weight, it must be indicated in the contract):
  Theoretical weight of steel pipe per meter (the density of steel is 7.85kg/dm3) calculation formula:
  W=0.02466(D-S)S
  In the formula: W–theoretical weight of steel pipe per meter, kg/m;
  D–the nominal outer diameter of the steel pipe, mm;
  S–the nominal wall thickness of the steel pipe, mm.
  ③Guarantee conditions
   Perform inspections according to the stipulated items of the current standard and ensure compliance with the stipulations of the standard, which is called the guarantee condition. The guarantee conditions are divided into:
  A. Basic guarantee conditions (also known as compulsory guarantee conditions). Regardless of whether the customer indicates in the contract. It is necessary to carry out the inspection according to the standard and ensure that the inspection result meets the standard.
  Such as chemical composition, mechanical properties, dimensional deviation, surface quality, and process performance tests such as flaw detection, hydraulic test or flattening or flaring are all required conditions.
B.协议保证条件:除标准中的基本保证条件外,还有“按买方要求,供方与买方协商后,并在合同中注明?”有些客户对标准中基本保证条件提出了更严格的要求(如成分、力学性能、尺寸偏差等)或增加检验项目(如钢管椭圆度、壁厚不均匀等)。以上条款和要求,订货时,双方协商,签订技术供应协议,并在合同中注明。因此,这些条件也称为协议保证条件。具有协议保证条件的产品一般要求涨价。
  ④ batch
  The “batch” in the standard refers to an inspection unit, that is, an inspection lot. If the batch is grouped by the delivery unit, it is called the delivery batch. When the delivery lot is large, one delivery lot can include several inspection lots; when the delivery lot is small, one inspection lot can be divided into several delivery lots.
   The composition of “batch” usually has the following requirements (see relevant standards for details):
  A. Each batch should be composed of steel pipes of the same brand (steel grade), the same furnace (tank) number or the same parent furnace number, the same specification and the same heat treatment system (heat).
   B. For high-quality carbon steel structural pipes and fluid pipes, it can be composed of steel pipes of the same brand, same specification and the same heat treatment system (heat) of different furnaces (tanks).
   C, each batch of welded steel pipes should be composed of steel pipes of the same brand (steel grade) and the same specification.
  ⑤High-quality steel and high-quality steel
   In the standards of GB/T699-1999 and GB/T3077-1999, those with “A” after their grades are high-grade high-quality steels, otherwise they are general high-quality steels.
  High quality steel is superior to high quality steel in some or all of the following:
  A, narrow the range of ingredient content;
  B, reduce the content of harmful elements (such as sulfur, phosphorus, copper);
  C, to ensure high purity (requires less non-metallic inclusions);
  D, to ensure high mechanical properties and process performance.
  ⑥Vertical and horizontal
   According to the standard, the longitudinal direction refers to those parallel to the processing direction (that is, along the processing direction); the transverse direction refers to the perpendicular to the processing direction (the processing direction is the axial direction of the steel pipe).
   When doing the impact energy test, the fracture of the longitudinal specimen is perpendicular to the processing direction. Therefore, it is called the transverse fracture; the fracture of the transverse sample is parallel to the processing direction, so it is called the longitudinal fracture.

评论都关门了。